Cloakroom Garment Hanging Racks / Stands
The ‘FGR freestanding coat rack’ single side unit with captive chrome hanging rail, mesh top shelf and shoe rack is commonly used in reception areas, public cloak rooms, changing rooms, locker rooms, drying rooms etc to store visitors clothing, coats / bags etc in commercial premises.
The FGR garment hanging racks measure 480mm deep x 1750mm high overall, with a Top Mesh Shelf 300mm deep, Mesh Shoe / Bag rack 400mm deep both in a steel support frame.
The ‘FGRD’ double sided coat racks with captive chrome hanging rails, mesh top shelf and shoe rack both sides is a variation of the FGR cloakroom rack for use in the middle of the rooms, with generally the same size and features. Except the FGRD garment hanging rack measures 790mm deep x 1750mm high overall, with a Top Mesh Shelf 630mm deep.
Both cloakroom clothing rail ranges are available in 1.1m, 1.4m, 1.7m and 2m lengths as standard.
Both are Supplied part-assembled with just twelve bolts required to complete assembly (bolts, spanner and instructions included).
Coat Racks / Coat Stands options include:
CAP - Steel captive coat hangers (slide over rail before assembly).
Special length coat racks / coat stands and continuous runs (on request).
Pre Zinc Coating to provide additional rust protection in humid / wet areas (12.5% extra).
Ordering Coat Racks / Coat Stands
Order from the Freestanding Coat Racks range, now!
Our most popular sizes of cloakroom seating / benches, wall shelves, garment racks, coat rails and accessories are usually available ex stock (in blue only), for all other colours please allow up to 3 working weeks delivery.
If you have a more urgent requirement or need a specific delivery date, please contact us and we will try our best to accommodate.
Similarly if you need a specific size or specification of bench, please contact us as we can manufacture bespoke benches for just a little bit more than our standard ranges.
Please Note:
Delivery within mainland U.K. (excluding the highlands and islands) is included in our online prices, however VAT is NOT.
Every order is delivered complete with a screwdriver, spanner* and instructions – in fact everything you need for assembly except the labour (we can also provide an installation service at additional cost if required).
* Vers-a-rail does not come with a spanner as only a screwdriver is needed for assembly.
|