Locker Room Locker Seats and Stand

The ‘LSS range’ locker room locker stand with seat serves two primary purposes, it raises the lockers off the ground to make them more accessible and because the seat is immediately in front of the locker it enables a more compact locker room design than using separate lockers and benches.

Available in depths, widths and heights to suit your lockers the range is best priced to suit each individual application to ensure a very cost effective solution.
However 'typical prices' are indicated below for smaller requirements.

To work out your Locker Benchrequirements - You need 1 Locker Stand Seat Starter then you can add up to 4 Locker Stand and Seat Width Extensions depending on the runs of lockers you require stands for.

They can be used with single door lockers, two door lockers, three door lockers, metal lockers etc as well as golf club lockers are most economical when the lockers are in 'nests' of three / four doors wide.

The Locker Seats Options include:
LSSRM - Locker Stand / Seat Mesh Shoe Rack (to keep footwear off floor in wet situations).
Pre Zinc Coating to provide additional rust protection in humid / wet areas (12.5% Extra).

We can also supply personnel lockers, clothing lockers, golf lockers, multi compartment lockers and associated cloakroom furniture.

Order from the Sport Locker Stands (with seats) range, now!

Our most popular sizes of cloakroom seating / benches, wall shelves, garment racks, coat rails and accessories are usually available ex stock (in blue only), for all other colours please allow up to 3 working weeks delivery.
If you have a more urgent requirement or need a specific delivery date, please contact us and we will try our best to accommodate.
Similarly if you need a specific size or specification of bench, please contact us as we can manufacture bespoke benches for just a little bit more than our standard ranges.

Please Note:
Delivery within mainland U.K. (excluding the highlands and islands) is included in our online prices, however VAT is NOT.

Every order is delivered complete with a screwdriver, spanner^* and instructions – in fact everything you need for assembly except the labour (we can also provide an installation service at additional cost if required).
^* Vers-a-rail does not come with a spanner as only a screwdriver is needed for assembly.